A positioning technology should be selected against the outcome needed in the actual building: recognizing a zone, finding equipment and guiding a person require different information. Bluetooth Low Energy, BLE (opens in a new tab), UWB (opens in a new tab), Wi-Fi (opens in a new tab) and RFID (opens in a new tab) are not levels in a single ranking. What matters is how signals are measured and combined, using which devices and references.
Start with the person or object being located
Section titled “Start with the person or object being located”A smartphone can collect several observations, but it must be compatible and used under the intended conditions. Equipment needs a tag or other prepared references instead; battery life, management cost and fixing options become important. Reading a label may be enough to identify the item without following its movement.
The result also differs: presence at a gate, a zone and coordinates are different information. A system suitable for inventory is not necessarily suitable for pedestrian navigation. Asset tracking also explains why update timing matters as much as spatial detail.
A qualitative comparison
Section titled “A qualitative comparison”| Family | Contribution and conditions to check |
|---|---|
| BLE | Radio observations can support proximity or position. Signal strength, direction and other measurements require different hardware and configurations; walls, people and orientation influence the result. |
| UWB | Time-based measurement techniques can estimate distances. Compatible devices and references with useful geometry are needed; obstructions and reflections require testing. |
| Wi-Fi | The network may provide radio observations. A network prepared for data traffic is not automatically ready for positioning; measurement functions and device support need confirmation. |
| RFID | A reader recognizes tags within its field. Gate detection, proximity and positioning are distinct uses; not every reading produces coordinates or continuous location. |
| Sensors and vision | Accelerometers, gyroscopes, the magnetic field and cameras provide complementary observations. Drift, calibration, mapping, light and usage conditions influence their usefulness. |
The table does not assign universal accuracy, battery life or cost figures. NIST highlights the difficulty of comparing systems across different environments (opens in a new tab).
Reading the technical references
Section titled “Reading the technical references”The Bluetooth Core Specification describes capabilities of the Bluetooth family: version 6.3 is an adopted specification, but does not establish which functions a particular phone supports. The IEEE 802.11 family concerns wireless local networks; its 2024 base edition is distinct from individual amendments.
IEEE 802.15.4z-2020 (opens in a new tab) introduced improvements to UWB measurements; the catalogue marks it as superseded. The active base reference consulted is IEEE 802.15.4-2024. Naming a standard clarifies a technical scope rather than certifying an installation’s performance.
Why combine several sources?
Section titled “Why combine several sources?”One source may lose quality while another remains usable. Indoor positioning introduces the combination of observations; a hybrid approach adapts their contribution to conditions. It does not remove the need for references, site preparation or recovery tests after an interruption.
A fictional example is a route through a bright atrium, a busy corridor and a plant room. The solution needs evaluation along the entire route, including floor changes and a device carried in a pocket, rather than at one favorable point. Selection must include infrastructure maintenance and map updates.
Criteria for a useful trial
Section titled “Criteria for a useful trial”Define areas, routes, spatial detail, acceptable delay and tolerated interruptions. Test representative devices and tags, measure floor errors and missed observations, and check behavior when a source degrades. Finally, connect the result to the task: can the technician actually find the destination?
The Technologies overview leads to technical detail and development kits. GiPStech presents adaptive hybrid localization (opens in a new tab) as a configuration to design and validate in context, rather than a universal combination ready for every site.