Maintenance standards address different questions: terminology, processes, indicators, documents, competencies and contracts. This map helps select a reference for closer study; it neither reproduces requirements nor makes general standards interchangeable with provisions specific to an installation.
The editions and statuses below were checked in official catalogues on 10 November 2026. The year is part of the reference: a withdrawn standard may still appear in an old specification without being the current edition.
Who develops them and how to read them
Section titled “Who develops them and how to read them”CEN and CENELEC (opens in a new tab) explain European standardization and the voluntary nature of technical standards. UNI is the Italian national standards body; EN and ISO identify European and international references respectively, which may also be adopted as national publications.
A technical standard is not a law. Applicability must nevertheless be examined alongside legislative references, contracts and case-specific requirements. “Voluntary” alone is therefore insufficient reason to disregard a reference relevant to the context. Check the subject, scope, edition and related documents.
Map by subject
Section titled “Map by subject”All editions in the table are current in their UNI catalogue records at the check date. The scopes are summaries, rather than full titles or extracts from the standards.
| Subject | Reference | Orientation provided |
|---|---|---|
| Terminology | UNI EN 13306:2018 (opens in a new tab) | Meaning of maintenance terms. |
| Processes | UNI EN 17007:2018 (opens in a new tab) | Processes and their characteristics. |
| Indicators | UNI EN 15341:2022 (opens in a new tab) | Performance indicator system. |
| Documentation | UNI EN 13460:2009 (opens in a new tab) | Information before and during operation. |
| Contracts | UNI EN 13269:2016 (opens in a new tab) | Preparing maintenance contracts. |
| Buildings | UNI EN 15331:2011 (opens in a new tab) | Planning and managing building maintenance. |
| Asset management | UNI EN 16646:2015 (opens in a new tab) | Maintenance’s role in physical asset management. |
| Asset decisions | UNI EN 17485:2021 (opens in a new tab) | Methods for incorporating maintenance into decisions. |
| Engineering | UNI EN 17666:2023 (opens in a new tab) | Maintenance engineering throughout the lifecycle. |
| Classification | UNI 11063:2017 (opens in a new tab) | Ordinary and extraordinary maintenance in resource management. |
| Global service | UNI 10685:2007 (opens in a new tab) | Results-based maintenance contracts. |
| Building global service | UNI 11136:2004 (opens in a new tab) | Preparing the request and proposed service project. |
| Personnel | UNI EN 15628:2025 (opens in a new tab) | Maintenance knowledge, skills and competencies. |
For assets more broadly, ISO 55000:2024 (opens in a new tab) covers vocabulary, overview and principles; ISO 55001:2024 (opens in a new tab) covers management-system requirements. Both are published. The asset management article explains their relationship with software and maintenance.
Withdrawn references and replacements
Section titled “Withdrawn references and replacements”UNI EN 15628:2014 (opens in a new tab) has been withdrawn with replacement since 11 December 2025; the current reference is UNI EN 15628:2025. UNI 11420:2011 (opens in a new tab), an earlier qualification reference, had already been withdrawn with replacement in 2014. Neither should be presented as a current standard alongside the new edition.
Before updating a contract or qualification path, examine the texts and relevant changes rather than merely changing the year in a heading. A standard’s existence does not automatically qualify someone for every technical task.
Choose the reference for the question
Section titled “Choose the reference for the question”UNI EN 17007 can be a starting point for defining the process; UNI EN 13460 for understanding what to document. Interpreting indicators instead requires consistent definitions and data, rather than a list of acronyms alone.
An imaginary organization preparing a maintenance service may need several references: process, documents and contract address different problems. GiPStech’s CMMS maintenance page (opens in a new tab) introduces operational tools, which do not replace the organizational system.
Consult official texts
Section titled “Consult official texts”Catalogues allow document identity, scope and status to be checked; full texts are available from the relevant bodies under their specified terms. This educational map does not replace legal or regulatory advice: always check the current text, updates and applicability to the particular case.