Skip to content
Select language:English

Corrective maintenance: handling failures and requests

Updated 3 min read

Corrective maintenance acts after a fault has been recognized to restore the asset’s required function. Organizing it means connecting reporting, priority assessment, diagnosis, work and outcome verification. Physical repair is only part of the process: waiting, incomplete information and handovers can contribute substantially to overall unavailability.

UNI EN 13306:2018 (opens in a new tab) provides the terminology framework. Corrective does not always mean emergency: work may be immediate or deferred following assessment of consequences and operating conditions.

A useful report identifies the item or location, describes the symptom and states when and under which conditions it was observed. “Not working” leaves many questions open; “pump P-017 does not start the required circuit” provides a clearer reference without pretending the cause is already known.

The recipient checks for duplication, identifies the responsible service and assesses priority. Consequences for people, the environment and service continuity matter, alongside alternatives and the potential for deterioration. The age of a request alone does not establish the order of work.

Service levels help distinguish response, acceptance and restoration times. A prompt first contact does not establish that equipment is available again.

After a failure, diagnosis checks the symptom and looks for the cause before restoration

Diagnosis verifies the symptom, gathers technical information and investigates the cause. Testing and interventions must follow the equipment’s procedures and be undertaken by competent people under the required safe conditions. This article explains work organization, rather than instructions for working on electrical or mechanical components.

A replacement may remove a symptom without eliminating its cause. Appropriate checks and a decision about any usage restrictions are therefore needed before restoration. Where work cannot continue, document why it is waiting, the condition left behind and the next responsible person: “suspended” without explanation does not help a colleague taking over.

The report should distinguish the observed issue, the cause where established, actions taken, materials and verification outcome. A suspected cause should be recognizable as such. The path from requests to work orders explains responsibilities between demand and execution.

Completing the work does not necessarily mean service acceptance or removal of every restriction. Agree who verifies the result and which evidence they use, especially where several suppliers participate.

At the Aurora laboratory, P-017 no longer provides the expected service. An attendant identifies the pump and describes the symptom. The manager assesses the available alternative and assigns a technician. Diagnosis informs the action; checks and outcomes are recorded after the work.

If a spare part is unavailable, the request remains recognizable as unresolved. If the issue recurs, earlier records allow symptoms and interventions to be compared. Recurrence suggests further investigation; it does not automatically establish that the previous repair was wrong.

Downtime, waiting for parts, travel and repeat work may outweigh the individual technical operation. Consistent categories help comparisons, while vague descriptions or premature closure make indicators less trustworthy.

Asset2Work’s reserved ticket documentation, which requires sign-in, explains tickets; the product includes failure categories and records connected to tickets. The public CMMS page (opens in a new tab) provides the context. Diagnostic quality and technical verification remain responsibilities of the maintenance process, rather than automatic consequences of digital recording.